Faucet cleaning and maintenance Four small tips

- Aug 21, 2019-

The cleaning of the faucet seems simple, but few people do it carefully, which makes cleaning the faucet difficult. When cleaning the faucet, it is necessary to adopt different cleaning methods according to different materials, and the cleaning power is also different. For example, the faucet on the surface of the plating can be wiped and cleaned with a boiling water mixed detergent, or even washed with some strong degreased detergent products. But the faucet on the wooden surface can't be so "simple and rough".

   After the faucet is used for a long time, it will produce some scale or rust. This is a normal phenomenon. When cleaning, the consumer only needs to use a wet cloth or sponge, and wipe it with a special cleaning agent. Finally, the surface needs to be cleaned. . Use a soft toothbrush to rub the toothpaste or use a scouring pad to wipe the toothpaste gently. It can clear the scale and oil, make the surface of the faucet clean and bright, and the maintenance method of the faucet.

1. In daily life, it is necessary not only to clean the faucet, but also to carry out regular maintenance work. Especially for the faucets in the bathroom, the impurities need to be cleaned regularly to ensure the normal use of the faucet. Because after the faucet is used for a period of time, if the water pressure is not lower than 0.02mpa, the amount of water will decrease, and even if the water heater is turned off, the impurities will be removed regularly, and the recovery can be restored as usual.

2, faucet maintenance needs to maintain good habits when using, when the faucet is opened and closed, the force is not too large, only need to turn around, force the assembly to destroy the faucet's sealing valve, resulting in faint faucet, water leakage.

3. For the faucet in the bathroom, the hose needs special attention to the habits. Some households will entangle the hose of the faucet on the faucet, which will cause the hose to break or be damaged.

4. When installing the faucet, you need to have experienced and qualified professionals to carry out the construction and installation. When installing, the faucet should not be bumped with hard objects. Do not leave cement, glue, etc. on the surface to avoid damage to the surface coating. Remove the debris from the pipe and install the faucet.